CellarMate Repair in London & the M25

Cellar cooling systems keep beer cellars at a stable temperature, typically around 11–13°C for cask ales, so that beer conditions properly and dispenses well. Systems are usually a through-wall unit or a split system with a remote condensing unit.

When a cellar runs warm the effects show up at the bar as fobbing, cloudy pints and wasted product, so prompt diagnosis protects both quality and margin.

CellarMate equipment is widely used in commercial premises, and our engineers regularly work on CellarMate cellar cooling systems. Every manufacturer has its own controllers, error codes, parts and service recommendations, so we treat the manufacturer's documentation as the starting point for any diagnosis or repair.

Where a genuine part is required, we confirm availability and lead times before ordering and explain any alternatives. If equipment is still under a manufacturer's warranty, check the warranty terms first, as some manufacturers require their own approved agents for warranty work.

CellarMate is a trademark of its respective owner. It is used here only to identify the equipment we work on; no manufacturer affiliation, approval or authorised-dealer status is implied unless confirmed in writing.

Every visit is scoped to the equipment and the problem in front of us. For cellarmate repair, the work typically includes the following, with any extra work explained and agreed before it goes ahead.

These are the problems we see most often on cellar cooling systems across London and the M25. Many start small and get worse if left.

A proper visit goes beyond fixing the obvious symptom. Depending on the equipment and the agreed scope, the engineer will check:

We work with music and events venues, breweries and taprooms, pubs and bars, restaurants with draught beer and many other commercial premises across London and the M25. We understand that equipment often has to be worked on while you are trading, so we plan visits to minimise disruption and keep areas clean and safe.

Multi-site operators and facilities managers can group equipment into one maintenance schedule, with consistent records across sites.

Work on refrigerant circuits must be carried out by engineers holding the appropriate F-Gas certification, and systems containing fluorinated gases above the relevant threshold need periodic leak checks with records kept by the operator. For food businesses, reliable chilled and frozen storage also supports your food safety management system: chilled food in England must generally be kept at 8°C or below, with many operators targeting 5°C or below, and frozen food is normally held at −18°C or colder.

After the visit you receive a record of the work carried out, readings taken where relevant and any recommendations, which you can keep with your maintenance and compliance documents.

Booking is straightforward and we keep you informed at each stage.

We focus on commercial premises, so our engineers are used to working around trading hours, food safety requirements, tenants and facilities teams. You get a named point of contact, clear explanations in plain English and a written record of what was found and fixed.

We also provide commercial gas safety certificates, catering equipment servicing and air conditioning work, so sites with several types of plant can deal with one contractor for planned visits and compliance paperwork across London and the M25.

Not every fault justifies a repair. Where cellar cooling systems are old, use a refrigerant that is being phased down, or keep failing, the engineer will tell you honestly whether a repair is good value or whether planning a replacement makes more sense. Age, energy use, parts availability and the cost of downtime all feed into that decision.

For equipment worth keeping, a planned maintenance schedule matched to how hard it works is usually the most cost-effective way to avoid emergency call-outs and keep running costs down.

Keep the condensing unit clear of bins, crates and debris; restricted airflow is a frequent cause of warm cellars in summer.

Keeping a simple log of temperatures, alarms and faults also makes diagnosis faster and helps spot patterns before equipment fails.