Gas Safety Inspection Commercial Catering Appliances Certificate (CP42)
The most common commercial gas safety certificate — covering all catering appliances in professional kitchens. Restaurants, cafés, takeaways, hotels, and more.
Officially RegisteredCP42 Gas Certificate
What is a CP42 Certificate?
The CP42 is the most common commercial gas safety certificate. It covers all commercial catering gas appliances found in professional kitchens, including cookers, fryers, grills, ovens, bain-maries, salamanders, and water heaters.
The CP42 certificate is specifically for commercial catering gas appliances found in professional kitchens.
This is one of the most commonly required certificates for restaurants, cafes, takeaways, hotels, and any premises with commercial catering equipment.
Our engineers inspect all commercial catering gas appliances including cookers, grills, fryers, ovens, and water heaters to ensure they are safe and in good working order.
The inspection covers gas supply, appliance operation, flue systems, ventilation, and emergency controls. Each appliance is individually tested and recorded on the certificate.
Why Do You Need a CP42 Certificate?
Environmental Health Officers routinely ask to see a valid CP42 certificate when inspecting food premises. Without one, your business may be forced to close until a certificate is obtained. Insurance companies also require valid gas safety certificates.
📋 Legal Requirement
Under the Gas Safety (Installation and Use) Regulations 1998 and the Health and Safety at Work Act 1974, employers have a duty to maintain gas equipment and ensure it is safe. Annual gas safety inspections are a legal requirement for commercial catering premises.
🔄 How Often?
Every 12 months. Many insurers and local authorities recommend more frequent checks for busy kitchens.
Gas Appliances Covered & Required Qualifications
Each appliance type requires the engineer to hold a specific ACS (Accredited Certification Scheme) qualification on their Gas Safe registration. Our engineers hold all of the qualifications listed below.
| Appliance | Gas Safe Qualification Required |
|---|---|
| Commercial range cooker (6-burner, 8-burner) | CCCN1 + COMCAT1 (Atmospheric Burners / Ranges) |
| Commercial oven (convection / fan-assisted) | CCCN1 + COMCAT5 (Forced Draught Burner Appliances) |
| Salamander grill / overhead grill | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Charbroiler / chargrill | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Deep fat fryer (single / double tank) | CCCN1 + COMCAT3 (Deep Fat & Pressure Fryers) |
| Griddle / flat plate grill | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Bain-marie (wet / dry heat) | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Tandoori oven / clay oven | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Wok burner (high-output ring) | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Pizza oven (gas-fired deck / conveyor) | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Stockpot burner / boiling ring | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Pasta cooker / boiling pan | CCCN1 + COMCAT2 (Pressure Water Boilers) |
| Combination oven (combi-steamer) | CCCN1 + COMCAT5 (Forced Draught Burner Appliances) |
| Rotisserie (gas-fired) | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Kebab machine / doner grill | CCCN1 + COMCAT1 (Atmospheric Burners) |
| Commercial dishwasher (gas-heated) | CCCN1 + COMCAT5 (Forced Draught Burner Appliances) |
| Commercial water heater (instantaneous / storage) | COCN1 + CIGA1 (Indirect-fired Heating) |
| Commercial boiler (heating) | COCN1 + CIGA1 (Indirect-fired Heating) |
Who Needs This Certificate?
⚠️ What Happens Without a Valid CP42?
Operating without a valid gas safety certificate puts your business, staff, and customers at serious risk:
- ✗Premises closure by Environmental Health
- ✗Loss of food hygiene rating
- ✗Insurance claim rejection in event of fire or injury
- ✗HSE prosecution and fines
- ✗Personal liability for business owner
CP42 Inspection Checklist
Every item below is verified by our Gas Safe registered engineer during the inspection:
Check gas isolation valves for each appliance
Test interlock system between extraction and gas supply
Inspect gas hoses, bayonet fittings, and stability chains
Check flame failure devices on every burner
Test pilot lights and ignition systems
Inspect ventilation and extraction systems
Perform combustion analysis on each appliance
Check gas pressure at each appliance
Test emergency gas shut-off valve (red handle)
Inspect flue systems and canopy extractors
Check for signs of combustion spillage
Verify CO alarm is present and working (if installed)
Our Gas Safety Inspection Process
Thorough Visual Assessment
Our engineer examines every gas appliance, pipe run, and fitting for wear, corrosion, or non-compliant installation before any testing begins.
Pipework Integrity Testing
We pressurise the gas pipework downstream of the meter and monitor for any drop, confirming no leaks exist within your installation.
Flue & Ventilation Checks
We verify that all flues draw correctly and combustion gases are safely evacuated, protecting your premises from carbon monoxide build-up.
Combustion Performance Analysis
Using calibrated flue-gas analysers, we measure CO, CO₂, and O₂ concentrations to confirm each appliance burns efficiently and within safe limits.
On-the-Spot Certification
Once every check passes, your Gas Safe registered engineer issues the relevant certificate immediately — no waiting, no follow-up visits.
Scope of the Inspection — Gas Interlock & Ventilation System
Complete Gas Interlock & Extraction System
Our engineers inspect the complete gas interlock system including the gas meter, solenoid valve, interlock control panel, extraction canopy, emergency stop controls, and ventilation system. All components must work together to ensure the gas supply is automatically shut off if the ventilation system fails.
Included in the inspection:
- ✓ Gas meter and downstream pipework to each appliance
- ✓ Gas solenoid valve operation and drop-tight testing
- ✓ Gas interlock control panel functionality and wiring
- ✓ Extraction canopy airflow rates and filter condition
- ✓ Emergency gas shut-off button (mushroom-head stop)
- ✓ Make-up air and ventilation system adequacy
- ✓ Interlock proving sequence (extraction on → gas enabled)
- ✓ All connected commercial catering appliances
- ✓ Flame failure devices and safety controls on each appliance
Not included:
- ✗ The incoming supply pipe before the meter (gas transporter's asset)
- ✗ The gas meter itself (owned by your gas supplier)
- ✗ Electrical wiring beyond the interlock panel (electrician's scope)
- ✗ Kitchen extraction ductwork cleaning (specialist contractor)
Suspect a gas leak before the meter? Call the National Gas Emergency Service on 0800 111 999 immediately — it is free and available 24/7.
Gas Interlock System Requirements (BS 6173:2020)
Under BS 6173:2020 and IGEM/UP/19, every commercial kitchen with mechanical ventilation must have a gas interlock system. The interlock ensures gas cannot flow unless the extraction system is running and providing adequate airflow. Here is how the system works and what our engineers check:
How the Gas Interlock Proving Sequence Works
Extraction fan starts — The kitchen extraction canopy fan must be switched on before any gas appliance can operate.
Air pressure switch confirms airflow — A differential air pressure switch mounted on the extraction ductwork detects that the fan is running and producing sufficient airflow. It sends a signal to the interlock panel.
Interlock panel energises the gas solenoid valve — Once the interlock panel receives confirmation of adequate airflow, it opens the gas solenoid valve, allowing gas to flow to the appliances.
If extraction fails, gas shuts off automatically — If the fan stops or airflow drops below the safe threshold, the air pressure switch de-energises, the solenoid valve closes, and gas is cut off within seconds.
Emergency stop — A red mushroom-head emergency gas shut-off button allows any staff member to manually cut the gas supply instantly in an emergency.
Required Components
- Gas solenoid valve — Must be fail-safe (closes on power failure), installed upstream of all appliance connections, and drop-tight tested annually
- Gas interlock control panel — Receives inputs from the air pressure switch and emergency stop; controls the solenoid valve
- Differential air pressure switch — Mounted on the extraction duct; proves the fan is moving sufficient air before gas is allowed
- Emergency gas shut-off button — Red mushroom-head type, located near the kitchen exit, accessible to all staff
- Make-up air supply — Replacement air must be provided to match extracted volume; without it, the system cannot function correctly
Ventilation Requirements
- Extraction rate — The canopy must extract at the rate specified by DW/172 or the appliance manufacturer, whichever is greater
- Canopy coverage — Must overhang all gas appliances by a minimum of 150mm on all sides (per BS 6173:2020)
- Grease filters — Must be in place, clean, and correctly fitted; missing or blocked filters reduce airflow and compromise the interlock
- CO₂ concentration — Must not exceed 2,800 ppm (0.28%) in the kitchen during normal operation
- Fire dampers — Ductwork fire dampers must be checked and free to operate; they must not obstruct airflow during normal use
Common Interlock System Failures We Find
Understanding Inspection Outcomes
Every appliance inspected receives one of three classifications. Knowing what each means helps you respond quickly and keep your business running safely.
Satisfactory
The appliance meets all current standards and is safe to operate. Simply schedule your next annual check and continue trading with confidence.
At Risk (AR)
The appliance falls short of current standards but poses no immediate threat to life. Continued use is at the responsible person's discretion while remedial work is arranged promptly.
- • Ventilation below recommended levels
- • Minor flue joint deterioration
- • Overdue servicing or worn seals
- • Damaged flame supervision device
Immediately Dangerous (ID)
The appliance poses an immediate risk to life. The engineer must disconnect and isolate it on the spot. Reconnection is only permitted after a qualified repair and a fresh safety inspection.
- • Active gas leak detected
- • Blocked or severed flue
- • Dangerously high CO readings
- • Flame failure device bypassed
- • Critical ventilation deficiency
We also service the equipment we can't certify — fridges, freezers and AC. One call, one engineer team.
Warning Notices Explained
When a fault is identified, the engineer records it formally. Here is what each notice type means for you and your premises:
At Risk Notice
Issued when an appliance does not fully conform to current standards yet is not life-threatening. The responsible person — landlord, manager, or business owner — is informed and should arrange repairs without delay.
Practical impact: The appliance may remain in use at your own risk while repairs are scheduled. However, if you decline to act, the engineer can escalate the classification to Immediately Dangerous.
Immediately Dangerous Notice
Issued when there is a direct and immediate risk to life. The engineer disconnects and caps the gas supply to the appliance without exception.
Practical impact: The appliance is labelled "DO NOT USE" and cannot be reconnected until a Gas Safe registered engineer completes repairs, confirms safe operation, and issues a new safety record.
CP42 Certificate Pricing
Prices start from £150 + VAT for 1 gas appliance. Additional appliances are charged at £25 + VAT each.
£150
1 appliance
£175
2 appliances
£200
3 appliances
£225
4 appliances
Commercial Gas Services Often Booked With a CP42 Certificate
Combine your CP42 inspection with any of the works below — completed by the same Gas Safe registered commercial engineer in a single visit.
Catering Equipment Servicing for CP42 sites
Service and repair of commercial catering appliances in the UK — ranges, ovens, fryers, grills, salamanders and steamers. Keeps CP42 certification valid year-round.
Commercial Gas Cooker Installation for CP42 sites
Installation and certification of commercial gas cookers and ranges in the UK to current Gas Safety (Installation & Use) Regulations.
Gas Interlock System Installation for CP42 sites
Supply, install and certify gas interlock systems in the UK commercial kitchens — a legal requirement under BS 6173 / DW172 wherever ventilation serves gas appliances.
FAQs about related services for CP42 sites
Can I book related commercial gas services with my CP42 certificate?+
Yes — when our engineer attends to issue your CP42 certificate, they can also carry out catering equipment servicing, commercial gas cooker installation, gas interlock system installation in the same visit, saving you a separate call-out fee.
Are these related services available in my city?+
Yes. We deliver every related service alongside the CP42 certificate across London, Central London, Maidstone, Brighton, Guildford, Croydon and surrounding areas, using our own Gas Safe registered commercial engineers.
Will the related work appear on the same CP42 certificate?+
Some works (such as installation, commissioning or testing & purging) require their own CP-series certificate. Where that's the case we issue both certificates on the day, with one combined invoice.
Book Catering Equipment Servicing With Your CP42 Certificate — By City
Choose your nearest city to combine catering equipment servicing with a CP42 certificate — same engineer, same visit, one fixed quote.
FAQs about Catering Equipment Servicing + CP42 by city
Do you cover catering equipment servicing in London, Central London, Maidstone, Brighton, Guildford, Croydon for CP42 sites?+
Yes. We provide catering equipment servicing alongside CP42 certificates throughout London, Central London, Maidstone, Brighton, Guildford, Croydon and the surrounding regions, with same-day or next-day availability for most jobs.
How quickly can a Gas Safe engineer attend my city for a CP42 + catering equipment servicing booking?+
Across London, Central London, Maidstone, Brighton, Guildford, Croydon we typically attend the same day or next working day. Emergencies receive a 24/7 response and your CP42 certificate is issued on the day of inspection.
Is the price fixed when combining catering equipment servicing with a CP42 certificate locally?+
Yes. Tell us your city (e.g. London) and the appliances on site and we'll send a single fixed written quote for the CP42 certificate plus catering equipment servicing — no hidden fees.
Additional Commercial Gas Services in the UK
Beyond gas safety certification, our Gas Safe engineers cover the full range of commercial gas works in the UK.
Commercial Boiler Service in the UK
Annual servicing of commercial boilers in the UK — combustion analysis, safety checks, and a full service report. Keeps your boiler efficient, compliant, and warranty-valid.
- Combustion & flue gas analysis
- Burner, heat exchanger and controls inspection
- Boiler service report issued on the day
Commercial Boiler Installation in the UK
Specification, supply and installation of commercial boilers in the UK — from light commercial 30kW up to large cascade systems. Fully Gas Safe certified.
- Free site survey and load calculation
- Installation by Gas Safe commercial engineers
- Commissioning, certification & handover
Commercial Gas Tightness Test in the UK
Pressure (tightness) test on your commercial gas pipework in the UK, performed to IGEM/UP/1 or IGEM/UP/1B procedures. Required after pipework changes or when leaks are suspected.
- Strength and tightness test to IGEM standards
- Let-by, tightness and stabilisation checks
- Documented test results for your records
Catering Equipment Servicing in the UK
Service and repair of commercial catering appliances in the UK — ranges, ovens, fryers, grills, salamanders and steamers. Keeps CP42 certification valid year-round.
- Service of all major catering equipment brands
- Burner cleaning, gas valve & thermocouple checks
- Spare parts fitted on first visit where possible
Commercial Gas Cooker Installation in the UK
Installation and certification of commercial gas cookers and ranges in the UK to current Gas Safety (Installation & Use) Regulations.
- Pre-install gas supply & ventilation check
- Gas connection, isolation valve & flexi-hose
- Commissioning to manufacturer spec
Gas Interlock System Installation in the UK
Supply, install and certify gas interlock systems in the UK commercial kitchens — a legal requirement under BS 6173 / DW172 wherever ventilation serves gas appliances.
- Air-pressure or current-sensing interlock
- Wired to ventilation (extract & make-up air)
- Solenoid valve, control panel & emergency stop
Commercial Gas Pipework Installation in the UK
Design and installation of new commercial gas pipework in the UK — from meter alterations to full kitchen distribution runs. Fully tested, purged and certified.
- Pipe-sizing calculations (IGE/UP/2)
- Steel, copper or TracPipe installations
- Tightness testing & purging to IGEM standards
Emergency Gas Repair & Leak Detection in the UK
24/7 emergency response for gas leaks and faults at commercial premises in the UK. Make-safe, leak detection, repair and re-certification in one visit.
- Same-day emergency response
- Electronic leak detection (LDF + sniffer)
- Make-safe and isolation
Commercial Gas Safe Engineer Call-Out in the UK
Book a fully qualified commercial Gas Safe registered engineer in the UK for inspections, fault-finding, repairs or one-off works. Transparent fixed call-out fee.
- All commercial Gas Safe categories: COMCAT 1–5, CODNCO1, CORT1
- Same-day or pre-booked slots
- Diagnostics and written report
Commercial Gas Risk Assessment in the UK
Written gas risk assessment for commercial premises in the UK — identifies hazards, ventilation issues and required actions to keep your business compliant and insurable.
- Site-specific written risk assessment
- Ventilation and combustion air review
- Recommendations and action plan
Commercial Boiler Gas Safety Certificate in the UK
Annual gas safety certificate for commercial boilers in the UK — covers combustion testing, flue integrity, controls and safety devices. Issued on the day by Gas Safe registered commercial engineers.
- Combustion analysis & flue gas readings
- Safety device & interlock checks
- Boiler-specific safety certificate
Commercial Landlord Gas Safety Certificate in the UK
Annual gas safety certificate for commercial landlords in the UK — meets your legal duty under the Gas Safety (Installation & Use) Regulations 1998 for tenanted commercial premises.
- Inspection of all landlord-owned gas appliances
- Tightness test on landlord pipework
- Certificate suitable for managing agents & insurers
Commercial Property Gas Safety Certificate in the UK
Whole-property commercial gas safety certificate in the UK — ideal for buyers, sellers, landlords and managing agents needing one document covering every gas appliance on site.
- Single certificate covering all appliances
- Useful for sales, lettings & insurance
- Visual & functional safety inspection
Commercial Kitchen Gas Safety Certificate in the UK
CP42 commercial kitchen gas safety certificate in the UK — covering ranges, ovens, fryers, grills, ventilation and interlocks for restaurants, pubs and catering operations.
- All catering appliances tested
- Ventilation & interlock verification
- CP42 certificate issued on the day
Catering Gas Safety Certificate in the UK
Catering gas safety certificate (CP42) in the UK for any food business operating commercial gas appliances — restaurants, takeaways, cafés, hotels, schools and event caterers.
- Full CP42 inspection
- Combustion & ventilation checks
- Engineer issues certificate on-site
Commercial Gas Safety Record in the UK
Commercial gas safety record in the UK — the commercial equivalent of the domestic CP12, listing every appliance, its safety status and any defects found.
- Itemised appliance register
- Defect codes (ID, AR, NCS) recorded
- Digital & paper copies
Commercial Gas Inspection Certificate in the UK
Independent commercial gas inspection and certificate in the UK — for due diligence, dilapidations, change of ownership or insurance claims.
- Independent third-party inspection
- Written report with photographic evidence
- Defect schedule & remedial costings
Annual Commercial Gas Safety Check in the UK
Annual commercial gas safety check in the UK — your yearly statutory inspection of every gas appliance, flue and pipework run on the premises.
- Statutory annual inspection
- Reminders before expiry
- Multi-site contracts available
Commercial Gas Compliance Certificate in the UK
Commercial gas compliance certificate in the UK — confirms your premises meets the Gas Safety (Installation & Use) Regulations 1998, BS 6173, IGEM and DW172 standards.
- Full regulatory compliance check
- Ventilation & interlock review
- Pipework integrity verification
Shop Gas Safety Certificate in the UK
Gas safety certificate for shops and retail premises in the UK — covering back-of-house heating, hot water and any retail gas appliances.
- Retail & back-of-house appliances
- Suitable for chains & independents
- Certificate for landlord & insurer
Restaurant Gas Safety Certificate in the UK
CP42 restaurant gas safety certificate in the UK — full inspection of cooking appliances, ventilation and interlocks. Booked around your service hours.
- All cooking lines & prep appliances
- Extract canopy & interlock test
- Out-of-hours & weekend slots
Pub Gas Safety Certificate in the UK
Pub gas safety certificate in the UK — covers cellar gas, kitchen appliances, water heaters and heating boilers in one combined inspection.
- Cellar CO2 & gas line check
- Kitchen CP42 included
- Heating & hot water boilers
Café Gas Safety Certificate in the UK
Café gas safety certificate in the UK — annual CP42 covering espresso boilers, paninis, grills, hobs and water heaters in independent and chain cafés.
- Espresso & beverage equipment
- Cooking & prep appliances
- Ventilation & interlock review
Takeaway Gas Safety Certificate in the UK
Takeaway gas safety certificate in the UK — for fish and chip shops, kebab houses, pizzerias, Indian and Chinese takeaways and dark kitchens.
- Range, fryer & tandoor inspection
- Extract & interlock verification
- EHO & insurer compliant
Hotel Gas Safety Certificate in the UK
Hotel gas safety certificate in the UK — combined CP42 / CP15 / CP17 inspection covering kitchens, plant rooms, laundry and guest-facing gas appliances.
- Kitchen, plant & laundry coverage
- Multi-site & group discounts
- Out-of-hours scheduling
Care Home Gas Safety Certificate in the UK
Care home gas safety certificate in the UK — covering kitchens, heating plant, laundry and resident gas fires, meeting CQC and insurer requirements.
- CQC-aligned inspection
- Plant room & kitchen included
- Resident appliance checks
School Gas Safety Certificate in the UK
School gas safety certificate in the UK — for primaries, secondaries, academies and sixth forms. Covers kitchens, science labs, plant rooms and boilers.
- Kitchen CP42 included
- Science lab gas taps & isolation
- Plant & boiler inspection
Church Gas Safety Certificate in the UK
Church and place-of-worship gas safety certificate in the UK — covering boilers, warm-air heaters and church hall kitchens.
- Boiler & warm-air heater checks
- Hall kitchen CP42
- Charity-friendly pricing
Office Gas Safety Certificate in the UK
Office gas safety certificate in the UK — covering office heating boilers, hot water systems and any small kitchen / canteen gas appliances.
- Boiler & water heater inspection
- Office canteen appliances
- Suitable for landlords & tenants
Warehouse & Industrial Unit Gas Safety Certificate in the UK
Warehouse and industrial unit gas safety certificate in the UK — covering radiant tube heaters, warm-air units, plant boilers and process gas appliances.
- Radiant & warm-air heater checks
- Plant boiler inspection
- Process gas pipework review
Commercial Gas Meter Installation & Upgrade in the UK
Commercial gas meter installation, upgrade and relocation in the UK — including U6, U16, U25, U40 and rotary meters. Liaison with your gas transporter included.
- Meter sizing & load calculation
- Transporter liaison & MAM appointment
- Meter housing & ECV installation
Commercial Gas Regulator Replacement in the UK
Replacement of commercial gas regulators and governors in the UK — restoring stable inlet pressure to your appliances and pipework.
- Inlet & outlet pressure testing
- Like-for-like or upgraded regulator
- Lock-up & creep relief checks
Commercial Water Heater Service in the UK
Service and repair of commercial gas water heaters in the UK — Rinnai, Andrews, Lochinvar and similar continuous-flow and storage water heaters.
- Burner, flue & DHW checks
- Combustion analysis
- Descale & service report
Commercial Radiant Heater Service in the UK
Service of commercial radiant tube and plaque heaters in the UK — keeping warehouse and workshop heating efficient, compliant and warranty-valid.
- Burner & emitter tube inspection
- Flue & ventilation review
- Combustion analysis
Commercial Warm Air Heater Service in the UK
Service of commercial warm-air heaters in the UK — Powrmatic, Reznor, Benson and similar suspended and floor-standing warm-air units.
- Burner & heat exchanger clean
- Fan & control checks
- Flue gas analysis
LPG Commercial Gas Certificate in the UK
LPG commercial gas safety certificate in the UK — for premises off the mains gas grid using bulk or cylinder propane / butane installations.
- LPG appliance inspection
- Regulator & changeover checks
- Cylinder housing & bund review
Commercial Gas Purge & Recommission in the UK
Commercial gas purging and recommissioning in the UK to IGEM/UP/1 — required after pipework changes, meter swaps, or extended shutdowns.
- Direct or indirect purge to IGEM standards
- Oxygen & gas concentration monitoring
- Appliance relight & recommissioning
Commercial Flue Inspection & Testing in the UK
Commercial flue inspection and integrity testing in the UK — flue flow, spillage and CO testing on open-flued and room-sealed commercial appliances.
- Flue flow & spillage testing
- CO & CO2 ratio analysis
- Visual flue route inspection
Commercial Gas Isolation Valve Installation in the UK
Supply and installation of commercial gas isolation and emergency shut-off valves in the UK — including AECVs, solenoid valves and lever isolators.
- AECV & emergency shut-off valves
- Solenoid & manual isolators
- Located to BS 6173 / IGEM
Commercial Gas Appliance Disconnection in the UK
Safe disconnection and decommissioning of commercial gas appliances in the UK — for fit-out strip-outs, refurbishments, equipment swaps and end-of-lease handovers.
- Make-safe & cap-off to standard
- Appliance disconnection certificate
- Removal & disposal available
CP15 Commercial Boiler Certificate in the UK
CP15 commercial boiler certificate in the UK — plant commissioning records for commercial boilers, covering gas rate, combustion analysis and safety device checks.
- Full boiler commissioning record
- Combustion & gas rate analysis
- Safety interlock & control checks
CP15 Commercial Heating Certificate in the UK
CP15 commercial heating certificate in the UK — commissioning documentation for commercial heating plant, warm air units, radiant heaters and boiler rooms.
- Heating plant commissioning
- Flue & ventilation verification
- Burner set-up & efficiency readings
CP16 Commercial Gas Testing in the UK
CP16 commercial gas testing in the UK — plant service records covering appliance servicing, combustion testing and safety checks on commercial gas equipment.
- Plant service & strip-down clean
- Combustion analysis readings
- Safety device function testing
CP17 Commercial Gas Installation Testing in the UK
CP17 commercial gas installation testing in the UK — installation pipework tightness testing and purging to IGEM/UP/1 and IGEM/UP/1A standards.
- Installation pipework tightness test
- Purge & recommission where required
- Let-by and stabilisation checks
CP42 Commercial Catering Certificate in the UK
CP42 commercial catering certificate in the UK — the gas safety record for commercial kitchens, covering appliances, extraction, interlocks and ventilation.
- All catering appliances tested
- Extraction & interlock verification
- Ventilation air-change calculation
CP44 Commercial Leisure Gas Certificate in the UK
CP44 commercial leisure gas certificate in the UK — laundry and leisure appliance gas safety records for hotels, gyms, care homes and holiday parks.
- Laundry & leisure appliances tested
- Flue and ventilation checks
- Gas rate & combustion readings
Commercial Gas Safety Inspection in the UK
Commercial gas safety inspection in the UK — a full survey of appliances, pipework, flues and ventilation by Gas Safe registered commercial engineers.
- Every gas appliance inspected
- Pipework & flue integrity checks
- Defects classified ID / AR / NCS
Commercial Boiler Gas Safety Inspection in the UK
Commercial boiler gas safety inspection in the UK — dedicated boiler room inspections covering combustion, flue integrity, gas rate and safety controls.
- Boiler room & plant inspection
- Flue flow & spillage testing
- Gas rate & combustion analysis
Business Gas Safety Certificate in the UK
Business gas safety certificate in the UK — compliance documentation for any business premises using gas, from single shops to multi-site operations.
- Suitable for any business premises
- All gas appliances covered
- Insurance & landlord accepted
Factory Gas Safety Certificate in the UK
Factory gas safety certificate in the UK — gas safety inspections for production plant, process burners, warm air heaters and industrial pipework.
- Process & plant gas equipment
- Large-bore pipework testing
- Out-of-hours visits available
Commercial Gas Certificate Renewal in the UK
Commercial gas certificate renewal in the UK — quick annual renewals with reminders before expiry so your premises never trades uncertified.
- Expiry reminders before renewal
- Fast re-inspection appointments
- Multi-site renewal scheduling
Multiple-Appliance Commercial Gas Certificate in the UK
Multiple-appliance commercial gas certificate in the UK — one visit, one certificate covering every gas appliance on site at a per-appliance rate.
- All appliances on one certificate
- Discounted per-appliance pricing
- Ideal for kitchens & boiler rooms
Commercial Gas Compliance Inspection in the UK
Commercial gas compliance inspection in the UK — audit of your gas installation against the Gas Safety (Installation & Use) Regulations 1998, BS 6173 and IGEM standards.
- Regulatory compliance audit
- Ventilation & interlock review
- Documented defect schedule
Gas Safety Remedial Inspection in the UK
Gas safety remedial inspection in the UK — we assess failed or capped-off appliances, complete the remedial work and re-test to standard.
- Review of failed items
- Remedial works quoted upfront
- Repairs completed by Gas Safe engineers
Commercial Gas Certificate After Remedials in the UK
Commercial gas certificate after remedials in the UK — re-inspection and certification once outstanding defects have been corrected.
- Re-inspection of corrected defects
- Appliances recommissioned & tested
- Clean certificate issued
Ready to Book Your CP42 Certificate?
Secure your certificate today. Our Gas Safe registered engineers are available seven days a week with same-day service as standard.
Starting from £150 + VAT for 1 appliance • Same-day service available